User's Guide

Meeting Room Display Tablet User Guide T0006377_UG Version 0.5
TEKTELIC Communications Inc. Confidential Page 13 of 28
3 Installation
3.1 Included Product and Installation Material
The following items are shipped with each Tablet:
 Meeting Room Display Tablet
 5V AC-DC power adapter (optional)
 Four AA batteries (optional)
 Wall mount plate
 Security/Lock screw (T6)
 Product Manual
3.2 Safety Precautions
The following safety precautions should be observed:
 The Tablet is for indoor use only. Do not connect Tablet to any outdoor cables.
 The Tablet has no internal field serviceable parts other than the batteries. Other than
installing or replacing the batteries, the Tablet must only be opened by an approved
TEKTELIC service center.
 All installation practices must be in accordance with the local and national electrical codes.
 Ensure that the Tablet is located to eliminate any physical hazard to people or property.
 The Tablet shall be powered from the supplied AC-DC power adaptor or through Power over
Ethernet (PoE) or 4xAA batteries. Simultaneous application of power through more than
one input may result in unexpected operation and shall be avoided.
 Keep batteries away from the reach of children.
 Do not mix old and new batteries.
 If the Tablet is not expected to be used for extended periods of time, the batteries should
be removed before storage to avoid any leak.
3.3 Unpacking and Inspection
The following should be considered during the unpacking of a new Meeting Room Display
Tablet:
 Inspect the shipping carton and report any significant damage to TEKTELIC.
 Unpacking should be conducted in a clean and dry location.