Manualshelf

User's Guide

ManualsBrandsTEKTELIC Communications ManualsComputers & AccessoriesLoRaWAN IoT Display Tablet is indoor use
19202122232425262728
Meeting Room Display Tablet User Guide T0006377_UG Version 0.5
TEKTELIC Communications Inc. Confidential Page 21 of 28
5 Operation, Alarms, and Management
5.1 Configuration
The Meeting Room Display Tablet supports a range of Over-the-Air (OTA) configuration options.
Specific technical details are available in the Technical Reference Manual [2] . All configuration
commands need to be sent OTA during a Tablet’s downlink windows.
5.2 Default Configuration
The default configuration on the Tablet is:
Report the battery voltage every 1 (one) hour.
For Class A mode operation query room status every 10 minutes.
5.3 LED Behaviour
Room Status LED (on externally powered variant)
All 4 LED bars turn green when the room is available for booking, and turns red when room is
occupied.
System LED
The System LED shares the light pipe with the right bottom corner RGB LED.
During the boot and join procedure:
The System LED will blink continuously during normal boot up and join procedure.
Once the Tablet receives the first status downlink from the BNA the System LED turns
off and the bottom RGB LED reflects the status of the room.