User's Guide

ManualsBrandsTEKTELIC Communications ManualsComputers & AccessoriesKona Micro PoE Gateway is a LoRa base station

PROPRIETARY:

The information contained in this document is the property of TEKTELIC Communications Inc. Except as specifically

authorized in writing by TEKTELIC, the holder of this document shall keep all information contained herein

confidential, and shall protect the same in whole or in part from disclosure to all third parties.

All products, names, and services are trademarks and registered trademarks of their respective companies.

TEKTELIC Communications Inc.

7657 10

Street NE

Calgary, AB, Canada T2E 8X2

Phone: (403) 338-6900

KONA MICRO POE GATEWAY

USER GUIDE

Document Type:

User Guide

Document Number:

T0006600_UG

Document Issue:

1.4

Document Status:

Approved

Product Name:

Kona Micro PoE Gateway

Product Code:

See Table 1

Issue Date:

February 12, 2020

Summary of content (15 pages)

PAGE 1
KONA MICRO POE GATEWAY USER GUIDE Document Type: User Guide Document Number: T0006600_UG Document Issue: 1.4 Document Status: Approved Product Name: Kona Micro PoE Gateway Product Code: See Table 1 Issue Date: February 12, 2020 PROPRIETARY: The information contained in this document is the property of TEKTELIC Communications Inc.
PAGE 2
Document Revision Revision Issue Date Status 0.1 1.0 1.1 1.2 1.3 Oct. 8, 2019 Oct. 17, 2019 Nov. 6, 2019 Dec. 20, 2019 February 12, 2020 Obsolete Obsolete Obsolete Approved Approved 1.4 February 12, 2020 Approved T. Danshin Kona Micro PoE Gateway TEKTELIC Communications Inc. Editor Z. Herasymiuk S. Morrison Z. Herasymiuk S. Morrison T. Danshin T0006600_UG Confidential Comments First release Updated to new format Updated Sec. 1.
PAGE 3
Table of Contents List of Tables ................................................................................................................................... 4 1 2 3 Product Description ................................................................................................................. 5 1.1 Overview .......................................................................................................................... 5 1.2 Physical Interfaces ...................................
PAGE 4
List of Tables Table 1: Kona Micro Gateway Models ............................................................................................ 5 Table 2: Kona Micro PoE Gateway Interface Connector Types ...................................................... 7 Table 3: Kona Micro PoE Gateway Specifications........................................................................... 8 Kona Micro PoE Gateway TEKTELIC Communications Inc. T0006600_UG Confidential Version 1.
PAGE 5
1 Product Description 1.1 Overview The Kona Micro PoE Gateway is a LoRaWAN IoT gateway that supports the full range of LoRa WAN channels. The Gateway supports one external LoRa antenna, copper Ethernet backhaul, and optional 3G/4G wireless backhaul. All Gateway models are powering from an AC-DC power adapter and may optionally have an internal backup battery provisioned. Table 1 presents the currently available Kona Micro PoE Gateway models. Any model may have a backup battery provisioned.
PAGE 6
Figure 1: Kona Micro PoE Gateway Kona Micro PoE Gateway TEKTELIC Communications Inc. T0006600_UG Confidential Version 1.
PAGE 7
1.2 Physical Interfaces Figure 2 illustrates the connector layout for the Kona Micro PoE Gateway. Ethernet (PoE Compliant) DC Power LoRa RF Antenna Figure 2: Kona Micro Gateway Bulkhead Layout The Gateway connectors are listed in Table 2. Table 2: Kona Micro PoE Gateway Interface Connector Types Interface Connector Type Mating Connector LoRa Antenna Ports Reverse SMA female Industry standard Reverse SMA male DC Power Input Port Barrel Jack DC Barrel plug 2.1 mm (inner), 5.
PAGE 8
Table 3: Kona Micro PoE Gateway Specifications Attribute Specification Dimensions 120 (L) x 118 (W) x 41.5 (H) mm Weight 336 g (0.74 lbs) with battery, 245 g (0.54 lbs) without battery Operating Temperature 0°C to 40°C without battery 0°C to 38°C with battery Relative Humidity 5 to 95 %RH Operating Altitude -60 m to 4,000 m (-197 ft to 13,123 ft) Power Input, DC Port 12 VDC +/-10% Power Input, PoE IEEE 802.3af, IEEE 802.3at, IEEE 802.
PAGE 9
2 Installation 2.1 Overview  The Kona Micro PoE Gateway is intended for indoor use only.  The Kona Micro PoE Gateway has no internal field serviceable parts other than the battery. Other than installing or replacing the battery, the Gateway module must only be opened by an approved TEKTELIC service center.  All installation practices must be in accordance with the local and national electrical codes.
PAGE 10
Mounting screw location Mounting screw location Figure 3: Kona Micro PoE Gateway Mounting Screw Locations While wall mounted, the Gateway module must be oriented with the TEKTELIC logo horizontal, parallel to the earth as shown in Figure 4. Kona Micro PoE Gateway TEKTELIC Communications Inc. T0006600_UG Confidential Version 1.
PAGE 11
Figure 4: Kona Micro PoE Gateway Module Wall Mounting Orientation Ensure that the wall on which the Gateway is being mounted is secure, flat and able to support a load of at least 0.5 kg (1.1 lbs). The Kona Micro PoE Gateway wall mounting procedure is as follows: 1. Install the M3 screws into the wall. 2. Install 2 site supplied M3 screws into the wall at 60 mm (2.4”) center spacing, leaving the screw heads protruding with a 3 mm gap from the wall surface. 3.
PAGE 12
Figure 5: DC Power Connection Polarity 2.5 Battery Installation Use only the battery provided by Tektelic Communications Inc. CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Remove the battery cover by removing the two battery cover securement screws. Connect the 3-pin battery connector to the connector at the bottom of the battery compartment and then insert the battery into the battery compartment as illustrated in Figure 6.
PAGE 13
Figure 6: Battery Installation 2.6 RF Cable Installation The Kona Micro PoE Gateway installation requires connection to an RF antenna. The antenna attaches to the reverse SMA connector located on the side of the Gateway. Torque the connector to 5 in·lbs. The Kona Micro PoE is not protected from lighting surge as it is intended for Indoor use. Do not connect directly to an outdoor antenna. 2.
PAGE 14
3 Radio Compliance Statements Federal Communications Commission This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. 2. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 15
This device has been designed to operate with an omni-directional antenna having a maximum gain of 0 dBi in the 923-928MHz transmit band. Antennas having a gain greater than 0 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. During product operation, always keep a separation distance of at least 0.2 m from any connected antenna(s).