User Manual

ManualsBrandsTEKTON ManualsHand Tools3/4 in. Drive Click Torque Wrench (50-300 ft./lb.)

Model #

24350

STORE THIS MANUAL IN A SAFE

PLACE FOR FUTURE REFERENCE

TORQUE WRENCH

OPERATOR’S MANUAL

• At low torque settings, pull wrench slowly to observe click.

Please read and understand entire manual, including all safety information, before using torque

wrench. This tool is a precision measuring instrument. Handle with care and store properly. Do not

attempt to increase leverage of this wrench with any other device. Failure to follow all instructions

could result in damage to torque wrench, property damage, or injury.

• Wrench is shipped ready to use, calibrated and tested to an accuracy of +/- 4%. To maintain this

accuracy, it is important that wrench is stored at lowest torque setting, 50 .-lb (67.8 Nm).

This setting relieves extra tension on the internal spring, eliminating fatigue that can adversely

affect accuracy.

888-648-3371

support@tekton.com

NEED HELP?

Summary of content (4 pages)

PAGE 1
Model # 24350 ® TORQUE WRENCH OPERATOR’S MANUAL STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE !? NEED HELP? 888-648-3371 support@tekton.com Please read and understand entire manual, including all safety information, before using torque wrench. This tool is a precision measuring instrument. Handle with care and store properly. Do not attempt to increase leverage of this wrench with any other device.
PAGE 2
SETTING TORQUE READING Fig. A HANDLE BODY KNURLED HANDLE MAIN SCALE This is a dual-range torque wrench marked with foot pounds (ft.-lb.) and Newton meters (Nm) on opposite sides of handle. The torque scale is marked on the handle body with more precise subdivisions on the knurled MICROMETER SCALE LOCK NUT handle (Fig. A). In these instructions the handle STORE AT STORE AT body scale will be referred to as the “main 50 FT. - LB. 50 FT. - LB. scale” and the knurled handle scale will be Fig. B FT.-LB. Fig.
PAGE 3
MAINTENANCE AND STORAGE STORE AT 50 FT.-LB. FT. - LB. Fig. E 1. If wrench has not been used for a long period of time, operate it several times at a low torque setting. This will allow internal lubricant to recoat moving parts. 2. When wrench is not in use, keep adjustment at lowest torque setting, 50 ft.-lb./ 67.8 Nm (Fig. E). Do not turn handle below lowest torque setting. 3. This wrench is a precision measuring instrument. Take care to operate wrench correctly. Store in a clean, dry environment. 4.
PAGE 4
M T AR DLE HAN CHE RAT RATCHET PAWLS AND SPRINGS ING AIN RETNG RI RUBBER O-RING PIN ROLLER PIN N O ATI IBR CACLREW S PIN LOCKING SHAFT WASHER POMMEL NUT LOCK NUT 3/4 in. 24 Tooth 26.3 in. 50 - 300 ft.-lb. / 67.8 - 406.7 Nm 1 ft.-lb. / 1.35 Nm +/- 4% LOCKING LUG ASSEMBLY ADJUSTMENT SPRING Drive Ratchet Length Dual Range Increment Accuracy KNURLED HANDLE C STI PLAP CA ROLLER BEARING © 2017 TEKTON.