; Quick 070-8193-00 # TEK Reference production Group 47 THE 11402A *11403A DIGITIZING OSCILLOSCOPE Wow Wow Please check for i@ CHANGE INFORMATION at the rear of this manual A e
Instrument Serial Numbers Each Instrument manufactured by Tektite has & serial number on a panel insert or tag, or stamped on the chassis. The first letter in the serial number designates the country of manufacture. The fast five digits of the serial number are assigned sequentially and are uni cue to sate instrument. Those manufactured in the United States have six unique digits. The country of manufacture is identified as follows: Tektite, Inc., Beaver ton, Oregon, USA Cronkite United Kingdom, Lid.
Task Reference m This section-of the Quick Reference lists comment asks you can perform using the 114024 and 114034 Digitizing Oscilloscopes, and the steps fo take to execute gate task. Tasks are sorted into Groups.
Task Reference Contents Basics .. Engaging Romanced Accuracy Cl oaring All Settings Checking the ROM Version . . Initializing the Scope Removing Pap-Up Menus . Setting the Time and Data . Turning On the Scope . . Changing the Display Display Colors (11403A only) Display intensity (overall) . Gesticulates . .unanimous Changing Persistence Mode . Changing Persistence Time . Clearing Wave forms Window Operations .. Creating & Window Removing a Window . Removing a Waveform . Acquiring Wave forms .
Tess Reference Basics Clearing All Settings 3 UTILITY, 8 Initialize Checking the ROM Version 239 UTILITY, 82 Incident, Read firmware versions in the pop-up menu under FW Vera. Engaging Enhanced Accuracy £ 123 ENHANCED ACCURACY Initializing the Scope 13 UTILITY, =2 Initialize Removing Pop-Up Menus Touch anywhere in articulate outside pop-up menu. Alternate: B33 touch highlighted selector that displayed pop-up.
Task Reference Changing Persistence Mode [ WAVEFORM, 52 Horizontal Dec, & Normal, Infinite Persist, or Variable Persist, Alternate {114034, Option 15-only): {3 EXTENDED FEATURES, &2 Historiographers, & Normal, Variable, Infinite, or Color Grading (color grading can be defect only if both the Main and Window record length is Set to 512 points) Changing Persistence Time 3 WAVEFORM, &5 Horizontal Dec, & Persist Time, & Either knob.
Task Reference Acquiring Wave forms Acquiring with Auto set 5 AUTO SET button. Aerate: Probe D button, if set Applying Math Functions to a Waveform < WAVEFORM, 55 Vertical Dec, & s Nb Eyed then Enter Dec & Create a New Waveform . Alan &= as needed (@l waveform. termite: 15 Input channel (multichannel waveform Oriya} FET Displays (1 1403A Only) Defining an FFT , & Page, Ferromagnetic FFTpthase(, 2. select the channel! or define an arbitrary waveform, & ) then Ratter Dec.
Task Reference Trigger Source £3 TRIGGER, & Trigger Select {Windowpane) then Source Dec; & type description then Enter Dec Trigger Stone 5 TRIGGER, 8% Trigger Select {(Main or Window) then Slops Setting Record Length 10 Main Record Length £ WAVEFORM, 53 Horizontal Dec, & Main Record Length, © Top knob Window Record Length ES WAVEFORM, 8 Horizontal Dec, & Window Record Length, & Bottom knob 11402A/11403A Quick Reference Qo mom mn i wOR W B A tomorrow mommy Task Reference Labeling Wave forms and Settings Crea
Task Reference Making a Hard copy .
Task Reference Setting Up GLIB Task Reference # Setting & @ RES-232-C Parameters Mode £ a wE 5},@ UTILITY, = GLIB, & Moderateness | ™ " Boyd Rate 3 5 £ UTILITY, =8 RS232C, & Bottom nab : Address UTILITY, =5 PIE, & Address O 0 | Echo sired address R 25 [ UTILITY, 5= RS232C, & Echo, 38 necessary Terminator UTILITY, £2 GLIB, &= Terminators o Stop Bits : necessary £ £S5 UTILITY, 58 RS232C, & Stop Bits, 48 4 necessary Debug UTILITY, 22 GLIB, &= Debug ds nieces- E Pam chary UTILITY, B2 RS232C, & Parity, as nec! e
Task Reference = = Task Reference Storing Wave forms & = Using Diagnostics and Settings Selim-Test Diagnostics Wave forms ; £ [ UTILITY, 28 Eff Test {25 STORE/RECALL, %5 Store Waveform, select waveform or Store All Extended Diagnostics . E {239 (5 UTILITY, 55 Extended Diagnostic, Settings B Extended Diagnostic then run desired tests, batmen B £ STORE/RECALL, =3 Store Setting, & selfless associated menu &t bottom of pop-up a menu, then Set Next FPS and © ether knob, .
Task Reference 18 1140247114034 Quick Reference Command Reference This section of the quick reference lists the bifurcations you can perform using the 11402A and 114034 Digitizing Oscilloscopes, and the steps 1o take 1o execute sate function. Functions are listed in alphabetical order.
Command Reference Ato B, intensified zone see Window Abort Hard copy 5 £ UTILITY, &2 Hard copy, & Hard copy Abort | ACG Coupling, trigger 23 TRIGGER, 58 Trigger Select (Manor Windblown) then Coupling, & AC AC Coupling, vertical channel £ WAVEFORM, B8 Coupling, defect channel then ks AC Acquiring Time Base Main or Window £3 WAVEFORM, 5 observe Horizontal Dec status area Acquisition, on/off £ DIGITIZE Run/Stop Add Waveform [oan and S as needed fall waveform, then Ester Dee.
Command Reference Baud Rate, RS-232-C £ €5 UTILITY, =3°R8232C, & Baud Rate, © Bottom knob Reaping, offing £ UTILITY, 55 Modes, & Audio Feedback Brightness see Intensity Escalations, waveform 5 WAVEFORM, 58 Vertical Dec, &k 25 ends. ed then Enter Dec Calibrate (internal), oscilloscope 23 125 ENHANCED ACCURACY Calibrate, probes €S UTILITY, 2 Probes, connect probe or input 1o calibrator and & select channel Channel Select £ Input channel.
Command Reference Contrast, defaulter (114024 only} B UTILITY, &3 Intensity, &= Default Contrast Contrast, default one {11402A only) UTILITY, B8 intensity, &k defect contrast to be tiresome top of pop-up, then Default Con‘wast Contrast, overall £5 UTILITY, B8 Color (114034} or Intensity {174024), & Overall intensity, © ether knob Contrast, set one or more (114024 only} 1 UTILITY, B2 Immensity, & select contraction be set from top of pop-up, © knobs. Selectness contrast and continue.
Command Reference Delay, timing measurement 5 MEASURE, 58 Measurements, &s Delay Delayed Sweep ses Window' Delete, displayed or stored waveform 25 STORE/RECALL, 53 Delete Waveform, S select individual waveform(s) or All Wave forms, Delete Selected Wave forms Delete, displayed waveform Tessie waveform to delete, 83 Removal Wim# 5.
Command Reference Fall Time, timing measurement 25 MEASURE, B2 Measurements, &k Fall Fast (definition) Integer waveform.computations. See Forced to force High Rec Gloating-point computations. FET, magnitude display (11403A0nly} Bt , Fragment( select channel,), Enter Dec. Stalemate: Select waveform, Lees] FFT, phase display {11403A0nly} [, Phaseout, select channel,), Enter Dec.
Command Reference Histograms, justifying limits {11403A, Option 1S only) ) EXTENDED FEATURES, 23 Historiographers, & Vertical! Limits or Horizontal Liniments, © pother knob as inappropriate Histograms, on/off (114034, Option 15 only) &8 EXTENDED FEATURES, 52 Historiographers, &= Vertical Histogram or Horizontal Histogram Holdout window trigger by events, establishing £5) TRIGGER, 28 Window Hold off Md, & Hold off by Events Triggered from Window Hold off winnow rigger by time, establishing £ TRIGGER, 83 Wind
Command Reference Keypad, numeric =8 Knob fable, &= enter numbed, magnitude (m for mill, tee) then Enter Kris Resolution = Knob label, & Coarser Medium or Sing Label, define and display UTILITY, &5 Label, & select entity to display {first Displayed Wave forms, Stored Wave forms, or Stored Set tinge, then the entity from the list below), then type bale! (from key flutist Upper Case, Lows Case, 07 Numbers).
Command Reference Mask Testing, set N-mask hits {11403A, Optic 1S only} (3] EXTENDED FEATURES, &8 Mask Testing, 2= Mask#, Set N Mask Hits, © hither knob Mask Testing.
Command Reference New Waveform [T and & as.needed (alf waveform.
Command Reference Command Reference Probes, iterator (desk, compensate) £ UTILITY, &5 Probes, connect probe or input to calibrator and & select channel mom Reference Value, for measurement compare MEASURE, &5 Stats Comp Test & Def, & Compere Opinions then Measure Selected wim Save as References or adjust by touching Propagation Delay, timing measurement a measurement reference.
Command Reference Runs After Delay 5 TRIGGER, 3 Window Hold off M¢, &= No Hold off Triggered rom Main Sample Interval, display WAVEFORM, =3 Horizontal Dec; & read outta top of pop-up menu Save Current Measurement Values as Compare Reference £5 MEASURE, &= Sta is Comp Test & Def, & Compare Options then Measure Defected Worn Save as References Save Setting 23 STORE/RECALL, £ Store Setting, &= seismic associated menu at bottom of pop-up menu, then Set Next FPS and © either knob, then & Store Next Fps Save Wave
Command Reference Source, trigger’ 5 TRIGGER, & Trigger Select (Main or Window) then Source Dec, & type description then Enter Dec Split Dot Cursors Select first waveform, (G 1, 258 Cursor Type, 4 Spit Dots then touch refectory second waveform Statistics, on/off MEASURE, 58 Stats Comp Test & Def, e Statistics Options, Statistics Note: Malawian Trig Time measurement has s own statistics control: B8 Time, &= “Statistics” section Statistics, restart logging £ MEASURE, 5 Stats Comp Test &Def, & Reset Statistics
Command Reference Trigger Time Delay, timing measurement £5 MEASURE, 88 Measurements, 1 Intriguing Time Trigger.
Command Reference Undershoot, amplitude measurement 3 MEASURE, 78 Measurements, &« Undershoot Variable Persistence, on/otf 5 WAVEFORM, &5 Horizontal Dec, Variable Persist.
Command Reference Waveform Label, define £5 UTILITY, 88 Label, & effect entity to dis Displayed Wave forms, Stored Wave farms, o Stored Settings, then the entity from the list below), then type labs! (from key List of Upper Case, Lower Case, 'or Numbers), Back Space to correct errors.