User Manual Printer 200 Series

Novell NetWare Configuration

4-12

Network Utilities for Color Printers

Default parameters set up by quick configuration

The quickstart procedure uses the default print server and queue parameters

listed in the following two tables. If these default parameters are not

acceptable, use the Advanced ConÞguration Tool for further conÞguration

as described in the next topic, ÒAdvanced conÞgurationÓ on page 4-14.

Advanced ConÞguration Tool default print server parameters

Parameter Default value

Print server name TEKxxxxxx where xxxxxx represents the last six hex

digits of the printerÕs Ethernet address

Ethernet frame type Adaptive (printer uses the frame type of the Þrst Þle

server that responds to a broadcast from the printer)

Queue scan interval (sec) 15

ConÞguration server Automatically set during quick conÞguration

Error notiÞcation Disabled

Full name None

Print server operators SUPERVISOR or ADMIN (NetWare 4.0)

Notify list Empty

File server(s) to service Set during quick conÞguration

Queue (s) to service Set during quick conÞguration