Printer User Manual

Installing Printer Software
3
User Manual
3-3
6.
The Finish Installation dialog box contains instructions for completing the printer software setup;
click Next . The Add Printer Wizard program is automatically launched.
7.
In the Add Printer Wizard , click Next in the opening dialog box.
8.
Select your printer’s connection, either Local Printer or
Network Printer , and click Next .
9.
In the Manufacturers/Printers dialog box, click Have Disk .
10.
Type in the drive for the CD-ROM or diskette, and click OK .
11.
Select your printer, and click Next :
■ Tektronix Phaser 560 (standard printer configuration)
■ Tektronix Phaser 560 Extended (Extended Features option)
If you are not sure which version of the printer you have, check the printer’s startup page for
Extended Features: Yes or No .
12.
Select the port your printer is connected to, and click Next .
13.
Enter a name for the printer, and select the Phaser 560 as the default printer if desired, and click Next .
14.
Decide if you want to print a test page, Yes or No , and click Finish .
15.
In the Installation Completed dialog box, click Finish .
16.
You may see a Restart Windows dialog box if the system needs to update some files. Decide if you
want to restart now or later, and click OK .
Note
See the “Adobe PostScript Printer Driver User Guide” on the printer’s CD-ROM
(USERGUIDE.PDF) for detailed information on the AdobePS 4 driver.