Datasheet

Maximum configuration times,
typical
USB LAN GPIB
Function change 61 ms 61 ms 63 ms
Frequency change (except Pulse) 3 ms 4 ms 6 ms
Frequency change (Pulse) 2.5 ms 3 ms 8 ms
Amplitude change 65 ms 66 ms 77 ms
Select user ARB (4k points from USB Memory) 43 ms 40 ms 53 ms
Select user ARB (128k points from USB Memory) 86 ms 92 ms 92 ms
Data download time for 4k points 36 ms 21 ms 21 ms
Power source
Source 100-240 V, 47-63 Hz
115 V, 360-440 Hz
Consumption 120 W
Warm up time, typical 20 minutes minimum
Power on self diagnosis time < 24 s
Acoustic noise < 50 dBA
Display 9-inch capacitive touch screen with 800 * 480 resolution
User interface and Help languages English, French, German, Japanese, Korean, Simplified and Traditional Chinese, Russian (user selectable)
Auxiliary input characteristics
External modulation input, channel
1 and channel 2
Input range
Characteristic
AM, FM, PM, PWM ±1 V full range
FSK 3.3 V logic level
Input impedance 5.2 kΩ
Frequency range 125 kHz (1 MSa/s)
External Trigger input
Level TTL compatible
Impedance 10 kΩ
Minimum pulse width 100 ns
Slope Positive or negative selectable
Trigger delay range 0 ns to 85 s
Trigger delay resolution 100 ps or 5 digits
Trigger latency, typical 390 ns (trigger input to signal output)
Jitter (RMS), typical 100 ps (signal output, with external trigger input in burst mode)
10 MHz reference clock input
Impedance 1 kΩ
Input coupling AC
Datasheet
System characteristics
14 www.tektronix.com