User manual

At A Glance
1760 Series Component Waveform/Vector Monitor User Manual
2-7
H PRESET allowstheusertostoreandrecallupto9
front-panel setups. One additional recall is factory
pre-programmed. Presets one through eight can also
be accessed remotely.
H
CONFIG allows the user t o configure several operat-
ing parameters, such as input coupling, dc restorer
speed, and internal reference designation.
H
GAIN provides selection of X1, X5, X10, and variable
gain.
H
CRT menu allows adjustment of CRT focus, signal
intensity, and trace rotation.
H
CLEAR MENU turns off the selection portions of the
menu readout. When
CLEAR MENU has been used to
clear a m enu readout, push the menu button once t o
reinstate the readout, and once again to exit the
menu.