User's Manual

Table of Contents
CTS 710 SONET Test Set User Manual
xv
Table 3–20: Choices for Bit 5 of the K2 Byte When Mode
is Set to Span 3–169. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3–21: Choices for Bit 5 of the K2 Byte When Mode
is Set to Ring 3–169. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3–22: Choices for Bits 6–8 of the K2 Byte 3–170. . . . . . . . .
Table 3–23: Results Displayed on MAIN RESULTS Page 3–175.
Table 3–24: T1M1 Section Analysis Results Displayed on
the ERROR ANALYSIS Page 3–178. . . . . . . . . . . . . . . . . . . . .
Table 3–25: T1M1 Line Analysis Results Displayed on the
ERROR ANALYSIS Page 3–178. . . . . . . . . . . . . . . . . . . . . . . .
Table 3–26: T1M1 Path Analysis Results Displayed on the
ERROR ANALYSIS Page 3–179. . . . . . . . . . . . . . . . . . . . . . . .
Table 3–27: T1M1 VT1.5 Analysis Results Displayed on the
ERROR ANALYSIS Page 3–179. . . . . . . . . . . . . . . . . . . . . . . .
Table 3–28: T1M1 Payload Analysis Results Displayed on
ERROR ANALYSIS Page 3–180. . . . . . . . . . . . . . . . . . . . . . . .
Table 3–29: DS1 Path Analysis Results Displayed on
ERROR ANALYSIS Page 3–181. . . . . . . . . . . . . . . . . . . . . . . .
Table 3–30: DS3 Path Analysis Results Displayed on
ERROR ANALYSIS Page 3–181. . . . . . . . . . . . . . . . . . . . . . . .
Table 3–31: Measurements Displayed as Bar Graphs 3–183. . . . .
Table 3–32: Measurements Displayed as a Line Graph 3–184. . .
Table 3–33: Measurements Displayed as On/Off Graphs
for SONET Rates 3–185. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3–34: Measurements Displayed as On/Off Graphs
for Tributary Rates 3–186. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3–35: Time Represented by Bars on History Graph 3–188.
Table 3–36: Lines of the Instrument Configuration Page 3–199. .
Table C–1: Default Factory Settings C–1. . . . . . . . . . . . . . . . . . .
Table D–1: Standard CTS 710 Specifications D–1. . . . . . . . . . .
Table D–2: Option 22 DS1/DS3/VT1.5 Capabilities D–10. . . . . .
Table of Contents
CTS 710 SONET Test Set User Manual
xv
Table 3–20: Choices for Bit 5 of the K2 Byte When Mode
is Set to Span 3–169. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3–21: Choices for Bit 5 of the K2 Byte When Mode
is Set to Ring 3–169. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3–22: Choices for Bits 6–8 of the K2 Byte 3–170. . . . . . . . .
Table 3–23: Results Displayed on MAIN RESULTS Page 3–175.
Table 3–24: T1M1 Section Analysis Results Displayed on
the ERROR ANALYSIS Page 3–178. . . . . . . . . . . . . . . . . . . . .
Table 3–25: T1M1 Line Analysis Results Displayed on the
ERROR ANALYSIS Page 3–178. . . . . . . . . . . . . . . . . . . . . . . .
Table 3–26: T1M1 Path Analysis Results Displayed on the
ERROR ANALYSIS Page 3–179. . . . . . . . . . . . . . . . . . . . . . . .
Table 3–27: T1M1 VT1.5 Analysis Results Displayed on the
ERROR ANALYSIS Page 3–179. . . . . . . . . . . . . . . . . . . . . . . .
Table 3–28: T1M1 Payload Analysis Results Displayed on
ERROR ANALYSIS Page 3–180. . . . . . . . . . . . . . . . . . . . . . . .
Table 3–29: DS1 Path Analysis Results Displayed on
ERROR ANALYSIS Page 3–181. . . . . . . . . . . . . . . . . . . . . . . .
Table 3–30: DS3 Path Analysis Results Displayed on
ERROR ANALYSIS Page 3–181. . . . . . . . . . . . . . . . . . . . . . . .
Table 3–31: Measurements Displayed as Bar Graphs 3–183. . . . .
Table 3–32: Measurements Displayed as a Line Graph 3–184. . .
Table 3–33: Measurements Displayed as On/Off Graphs
for SONET Rates 3–185. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3–34: Measurements Displayed as On/Off Graphs
for Tributary Rates 3–186. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3–35: Time Represented by Bars on History Graph 3–188.
Table 3–36: Lines of the Instrument Configuration Page 3–199. .
Table C–1: Default Factory Settings C–1. . . . . . . . . . . . . . . . . . .
Table D–1: Standard CTS 710 Specifications D–1. . . . . . . . . . .
Table D–2: Option 22 DS1/DS3/VT1.5 Capabilities D–10. . . . . .