Datasheet

Digital Phosphor Oscilloscopes
DPO4000 Series
DPO4000 • www.tektronix.com/oscilloscopes
6
Search – Tired of turning the horizontal position
knob endlessly on your current scope to find the
event you’re looking for? Use the DPO4000’s
powerful Search feature to find and mark all
occurrences of an event based on user specified
criteria. Search types include edge, pulse width,
runt, logic, setup and hold, rise/fall time and I
2
C,
SPI, CAN, LIN, FlexRay and RS-232/422/485/UART
packet content.
Serial Buses – Trigger on packet level content,
view acquired data as a bus with all packets
decoded into hex or binary, search through acqui-
sitions for specific packet content and even view
all packets decoded in a tabular format, much like
you would see on a logic analyzer. Serial standards
supported include I
2
C, SPI, CAN, LIN, FlexRay and
RS-232/422/485/UART packet content.
Stunning Display – The DPO4000 Series boasts
a large, high-resolution display – 10.4 in (264 mm)
and 1,024x768 resolution (XGA).
Zoom/Pan – Dedicated front panel controls for
zooming and panning. The inner knob controls
zoom factor while the outer ring adjust pans the
zoom box across the waveform. Navigating your
waveform has never been easier.
Marks – Want to mark your waveform for future
reference or for quick navigation between events
of interest? Simply press the Set Mark button to
place “bookmarks” on your waveform. Use the <—
and —> buttons to navigate through user marks
and search generated marks.
1
2
3
45
6
5