Datasheet

Ethernet 10/100/1000BASE-T Application Software — TDSET3 • SR-ENET • DPO4ENET
Positive side AOI Template test of 100BASE-TX signal.
Template Tests
Template mask tests are often used to quickly verify that the transmitted
signal meets industry-standard requirements. These template masks
are defined so that signal distortions such as overshoot, jitter, incorrect
rise and fall times, etc., will cause the mask test to fail. An example of a
100BASE-TX template mask test is shown above.
Test Report Generation
The unparalleled automation built into TDSET3 also enables faster
validation including the tedious task of generating reports. The user can
generate summary or detailed reports at a press of a button.
Test Fixtures
The TF-GBE Series of test fixtures supports many of the Ethernet
compliance tests, providing convenient signal access, test points for
accurate removal of disturbing signals, return loss calibration, and
cross-connect circuits to connect to traffic generators and link partners.
The TF-GBE-BTP is the basic test package for 10/100/1000BASE-T tests.
The TF-GBE-ATP is the advanced test package which also includes a
1000BASE-T jitter test channel cable.
TF-GBE-BTP Basic Ethernet Test Fixture.
TF-GBE-EE Test Fixture for Energy Efficient Ethernet measurements on 10BASE-Te.
The TF-GBE-EE is an additional test fixture which is required to perform the
Energy Efficient Ethernet measurements.
Complete Solution for Receiver Test
Tektronix offers a complete solution for creating and managing “disturbing”
signals for accurate receiver stress testing. The Tektronix arbitrary
waveform generators provide support for adding and removing the
noise-related elements of the disturbing signal. Tektronix offers a complete
set of instruments for Ethernet compliance tests and debug work; from
oscilloscopes and probes, to compliance test software, test fixtures, and
signal sources.
www.tektronix.com 3