Datasheet

Display system
Display type 9 in. (229 mm) color display
Display resolution 800 horizontal × 480 vertical pixels (WVGA)
Interpolation Sin(x)/x
Waveform styles Vectors, Dots, Variable Persistence, Infinite Persistence
FastAcq. palettes Temperature, Spectral, Normal, Inverted
Graticules Full, Grid, Solid, Cross Hair, Frame, IRE and mV
Format YT, XY, and simultaneous XY/YT
Maximum waveform capture rate >280,000 wfms/s in FastAcq acquisition mode for 1 GHz models
>235,000 wfms/s in FastAcq acquisition mode for 100 MHz – 500 MHz models
>50,000 wfms/s in DPO acquisition mode on all models
Input/output ports
USB 2.0 high-speed host port Supports USB mass storage devices, printers and keyboard. One port on front and one port on rear of instrument.
USB 2.0 device port Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB (with a TEK-USB-488), and
direct printing to PictBridge-compatible printers.
Printing Print to network printer, PictBridge printer, or to a printer that supports e-mail printing. Note: This product includes software
developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)
LAN port RJ-45 connector, supports 10/100 Mb/s
Video out port DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector. XGA resolution.
Auxilliary input (Available on two-channel models only)
Front-panel BNC connector Input impedance, 1 MΩ
Maximum input 300 V
RMS
CAT II with peaks ≤ ±425 V
Probe compenstor output voltage
and frequency
Front-panel pins
Amplitude 0 to 2.5 V
Frequency 1 kHz
Auxiliary out Rear-panel BNC connector
V
OUT
(Hi): ≥2.25 V open circuit, ≥0.9 V 50 Ω to ground
V
OUT
(Lo): ≤0.7 V into a load of ≤4 mA; ≤0.25 V 50 Ω to ground
Output can be configured to provide a pulse out signal when the oscilloscope triggers, a trigger signal from the internal arbitrary
function generator, or an event out for limit/mask testing.
Kensington-style lock Rear-panel security slot connects to standard Kensington-style lock.
VESA mount Standard (MIS-D 75) 75 mm VESA mounting points on rear of instrument.
Datasheet
26 www.tektronix.com