Data Sheet

ManualsBrandsTektronix ManualsLaboratory EquipmentTektronix MDO34 3-BW-100 Digital 100 MHz 2.5 GS/s 10 MP 8 Bit

101A EMC probe set

150A EMC probe amplifier

110A Probe cable

0309-0001 SMA probe adapter

0309-0006 BNC probe adapter

Future instrument upgrades after purchase

Instrument upgrades

The 3 Series MDO products offer a number of ways to add functionality after the initial purchase. Listed below are the various product upgrades available and the method of

upgrade used for each product.

Post-purchase instrument options The following products are sold as stand-alone products and can be purchased at any time to add functionality to a 3 Series MDO

product. Software option key products require that the instrument model and serial number be provided at the time of purchase.

The software option key is specific to the model and serial number combination. One-time, permanent upgrade to any model

enabled through software option key.

SUP3 AFG Add arbitrary function generator to any 3 Series MDO product.

SUP3 MSO Add 16 digital channels; includes P6316 digital probe and accessories .

SUP3 SA1 Add spectrum analyzer; frequency range from 9 kHz to 1 GHz and capture bandwidth to 1 GHz.

SUP3 SA3 Add spectrum analyzer; frequency range from 9 kHz to 3 GHz and capture bandwidth to 3 GHz.

SUP3 SEC Add enhanced instrument security to enable password protected control of turning on/off all instrument ports and instrument

firmware update functionality.

SUP3 BND Add an application bundle (includes all serial options and power analysis option).

SUP3 SRAERO Add aerospace serial triggering and analysis (MIL-STD-1553, ARINC429).

SUP3 SRAUDIO Add audio serial triggering and analysis (I2S, LJ, RJ, TDM).

SUP3 SRAUTO Add automotive serial triggering and analysis (CAN, CAN FD, LIN, FlexRay).

SUP3 SRCOMP Add computer serial triggering and analysis (RS-232/422/485/UART).

SUP3 SREMBD Add embedded serial triggering and analysis (I2C, SPI).

SUP3 SRUSB2 Add USB serial triggering and analysis (USB 2.0 LS, FS, HS).

SUP3 PWR Add power measurement and analysis.

SUP3 T3 Three Year Total Protection Plaln, includes repair or replacement coverage from wear and tear, accidental damage, ESD or EOS

plus preventative maintenance, including a 5 day turnaround time and priority acdess to customer support.

SUP3 T5 Five Year Total Protection Plaln, includes repair or replacement coverage from wear and tear, accidental damage, ESD or EOS

plus preventative maintenance, including a 5 day turnaround time and priority acdess to customer support.

3 Series MDO