Datasheet

MDO3000 Series Mixed Domain Oscilloscopes
Configuration Guide
www.tektronix.com/mdo3000
Power cord
(no charge)
 A0-North America
 A1-Universal Euro
 A2-United Kingdom
 A3-Australia
 A5-Switzerland
 A6-Japan
 A10-China
 A11-India
 A12-Brazil
 A99-No power cord
User manual
(no charge)
 L0-English
 L1-French
 L2-Italian
 L3-German
 L4-Spanish
 L5-Japanese
 L6-Portuguese
 L7-Simplified Chinese
 L8-Traditional Chinese
 L9-Korean
 L10-Russian
 L99-No manual
 C3 Calibration service 3 years
 C5 Calibration service 5 years
 R5 Repair service 5 years (including warranty)
 G3 Complete care 3 years (includes loaner, scheduled calibration,
and more)
 G5 Complete care 5 years (includes loaner, scheduled calibration,
and more)
 D1 Calibration data report
 D3 Calibration data report 3 years (with C3)
 D5 Calibration data report 5 years (with C5)
 ACD3000 Soft carrying case
 HCTEK4321 Hard carrying case (requires ACD3000)
 RMD3000 Rackmount kit
Step 10. Select power cord and manual options
Step 11. Add extended service and calibration
 TPA-N-PRE External Preamplifier, 12 dB nominal Gain, 9 kHz to 6 GHz
 TPA-N-VPI Probe adapter from Type-N connector to TekVPI
 119414600 Near field probe set, 100 kHz to 1 GHz
 119660900 Flexible monopole antenna, 5 MHz to 1080 MHz
 TAP1500 1.5 GHz TekVPI
®
active single-ended voltage probe
 TCP0150 20 MHz TekVPI
®
150 Ampere AC/DC current probe
 TDP0500 500 MHz TekVPI
®
differential voltage probe, ±42 V differential input
voltage
 TDP1000 1 GHz TekVPI
®
differential voltage probe, ±42 V differential input
voltage
 THDP0100 ±6 kV, 100 MHz TekVPI
®
high-voltage differential probe
 THDP0200 ±1.5 kV, 200 MHz TekVPI
®
high-voltage differential probe
 TMDP0200 ±750 V, 200 MHz TekVPI
®
high-voltage differential probe
 TPP0502 500 MHz, 2X TekVPI
®
passive voltage probe, 12.7 pF input
capacitance
 TPP0850 2.5 kV, 800 MHz, 50X TekVPI
®
passive high-voltage probe
 TPA-N-BNC
4
TekVPI® to TekProbe™ BNC adapter
 MDO3LMT Limit and mask testing
Step 7. Add spectrum analyzer accessories
Step 6. Add additional probes
1 GHz bandwidth recommended for mask testing on high-speed (HS) USB.
Step 5. Add additional analysis capabilities
Step 9. Add mounting or traveling accessories
4/2014 © Tektronix 48W-30033-1
Looking for other probes? Check out the probe selector tool at www.tek.com/probes.
Planning to use your probe on the Spectrum Analyzer input? Check the TPA-N-VPI
in Step 7.
4
Recommended for connecting your existing TekProbe probes to the MDO3000.
 MDO3SEC Password protected security to enable or disable all
communication ports and firmware upgrades
 TEK-USB-488 GPIB-to-USB adapter
Step 8. Add additional I/O capabilities
Instruments ship with (2) USB host ports, (1) USB device port, (1) LAN port