User's Manual

Removal and Installation Procedures
6Ć42
MTG100 & MTG300 MPEG Generator Service Manual
  
 
  
 
  
 
 
  
  
 
 
  
  
 
  
 
  
 
  
 
Figure 6Ć20: CPU unit removal
4. Remove the CPU Board: See Figure 6-21.
a. Using a screwdriver with a size Phillips #2 tip , remove the screw
securing the CPU board to the frame with a retainer on the right side of
the unit.
b. Remove the screw on the left side of the CPU board.
c. Grasp the board and slide it out of the unit.