Datasheet

Passive 1x/10x Voltage Probe
P2220 P2221 Datasheet
Tektronix passive probe solutions provide high reliability and testing
accuracy for basic oscilloscope measurements. The P2220 and P2221 are
compact passive probes with selectable 1X/10X attenuation designed for
use with selected Tektronix oscilloscopes.
Key features
1x/10x attenuation
200 MHz bandwidth
1.5 m length
UL3111-1, CSA1010.1, EN61010-1, EN61010-2-031, and
IEC61010-2-031
Applications
Relative low-frequency measurements
Low-frequency computer and telecom measurements
Power supplies
Low-frequency amplifiers
P2220 P2221 passive voltage probes
The P2220 and P2221, 200 MHz passive voltage probes permit selection of
1x or 10x attenuation, using a switch located on the probe head.
The P2220 probe is compatible with TDS200, TDS1000, TDS1000B,
TDS2000, TDS2000B, and TPS2000 Series oscilloscopes. The P2220
probe also provides floating measurement capability up to 30 V
RMS
with
TPS2000 Series oscilloscopes only. (Note: Do not float with TDS2000,
TDS2000B, TDS1000, TDS1000B, or TDS200 Series oscilloscopes.)
The P2221 is compatible with MSO2000 and DPO2000 Series
oscilloscopes.
Specifications
Specifications apply to both probes unless indicated otherwise.
10X 1x
Bandwidth DC to 200 MHz DC to 6 MHz
Probe length 1.5 m 1.5 m
Attentuation ratio 10:1 1:1
Compensation range All oscilloscopes with 1 MΩ input
P2220 15 to 25 pF
P2221 10 to 25 pF
Input capacitance 17.0 pF 110 pF
Input resistance 10 MΩ 1 MΩ

Summary of content (2 pages)