Datasheet

Connectivity options
The TMDP and THDP Series probes are equipped with the TekVPI
®
interface which allows smart communication between the oscilloscope and
probe. Pushing the probe menu button will launch the probe control menu
on the oscilloscope display providing access to all relevant probe settings
and controls. These probes are designed to operate on TekVPI
®
oscilloscopes without requiring the TPA-BNC adapter.
The P52xxA Series probes are equipped with the Tektronix TekProbe
®
interface which communicates scale information to the oscilloscope. Direct
connections can be made to oscilloscopes configured with the TekProbe
®
interface or to any oscilloscope when used with the 1103 TekProbe
®
Power
Supply.
Specifications
All specifications apply to all models unless noted otherwise.
Model overview
Probes with the TekVPI
®
interface
TMDP0200 THDP0200 THDP0100
Attenuation 25X / 250X 50X / 500X 100X / 1000X
Differential Voltage 250X: ±750 V
25X: ±75 V
500X: ±1500 V
50X: ±150 V
1000X: ±6000 V
100X: ±600 V
Common Mode Voltage ±750 V ±1500 V ±6000 V
Maximum Input Voltage-to-Earth 550 V CAT I
300 V CAT III
1000 V CAT II
600 V CAT III
2300 V CAT I
1000 V CAT III
Bandwidth 200 MHz 200 MHz 100 MHz
Rise Time <1.8 ns <1.8 ns <3.5 ns
Slew Rate <275 V/ns at 1/250 gain <650 V/ns at 1/500 gain <2500 V/ns at 1/1000 gain
Input Impedance at the Probe Tip 5 MΩ || <2 pF 10 MΩ || <2 pF 40 MΩ || <2.5 pF
Typical CMRR DC: > -80 dB
100 kHz: > -60 dB
3.2 MHz: > -30 dB
100 MHz: > -26 dB
DC: > -80 dB
100 kHz: > -60 dB
3.2 MHz: > -30 dB
100 MHz: > -26 dB
DC: > -80 dB
100 kHz: > -60 dB
3.2 MHz: > -30 dB
100 MHz: > -26 dB
Cable Length 1.5 m 1.5 m 1.5 m
Probes with the BNC and TekProbe
®
interface
P5200A P5202A P5205A P5210A
Attenuation 50X / 500X 20X / 200X 50X / 500X 100X / 1000X
Differential Voltage 500X: ±1300 V
50X: ±130 V
200X: ±640 V
20X: ±64 V
500X: ±1300 V
50X: ±130 V
1000X: ±5600 V
100X: ±560 V
Common Mode Voltage ±1300 V ±640 V ±1300 V ±5600 V
Maximum Input Voltage-to-Earth 1000 V CAT II 450 V CAT l
300 V CAT ll
1000 V CAT II 2300 V CAT l
1000 V CAT III
Bandwidth 50 MHz 100 MHz 100 MHz 50 MHz
Differential Input Impedance 10 MΩ || 2 pF 5 MΩ || 2 pF 10 MΩ || 2 pF 40 MΩ || 2.5 pF
Input Impedance between each
Input and Ground
5 MΩ || 4 pF 2.5 MΩ || 4 pF 5 MΩ || 4 pF 20 MΩ || 5 pF
Typical CMRR DC: >80 dB
100 kHz: >60 dB
3.2 MHz: >30 dB
50 MHz: >26 dB
DC: >80 dB
100 kHz: >60 dB
3.2 MHz: >40 dB
50 MHz: >30 dB
Cable length 1.8 m
Datasheet
2 www.tektronix.com