Manual

User safety summary
Terms in manual :
Caution: Conditions that can result in damage to the product.
Warning: Conditions that can result in personal injury or loss of life.
Use proper power source: Do not operate this product from a power source that applies more than
the voltage specified. To avoid fire hazard, use only the power cord specified for this product. In
hospital applications, grounding reliability can only be achieved by the use of a hospital grade
power cord, and the equipment is connected to an equivalent receptacle marked “hospital only” or
“hospital grade.”
Operation of product: There are no user-serviceable parts inside the product. Avoid electric shock
by contacting a qualified service technician to repair the product. Do not operate without the covers
and panels properly installed. Do not operate in an atmosphere of explosive gases or flammable
mixtures.
Safety instructions: Read all installation instructions carefully before you plug the product into a
power source.
Terms on product:
CAUTION: A personal injury hazard exists that may not be apparent. For example, a panel may
cover the hazardous area. Also applies to a hazard to property including the product itself.
DANGER: A personal injury hazard exists in the area where you see the sign.
Care of product: Disconnect the power plug by pulling the plug, not the cord. Disconnect the power
plug if the power cord or plug is frayed or otherwise damaged, if you spill anything into the case, if
product is exposed to any excess moisture, if product is dropped or damaged, if you suspect that the
product needs servicing or repair, and whenever you clean the product.
Ground the product: Plug the three-wire power cord (with grounding prong) into grounded AC
outlets only. For protection against electric shock, this product is classified Class I, and Type B
where applicable.
Symbols as marked on product:
DANGER high voltage:
Protective ground (earth) terminal:
Hot surface on or in the printer. Use caution to avoid personal injury: