User's Manual

Getting Started
8 AFG3000 Series Quick Start User Manual
Recommended Accessories
The following optional accessories are recommended for your instrument:
■ 50 Ω BNC cable, double-shielded, 91 cm (36 in) (Tektronix part number 012-0482-00)
■ 50 Ω BNC cable, double-shielded, 250 cm (98 in) (Tektronix part number 012-1256-00)
■ GPIB interface cable, double-shielded, 2 m (Tektronix part number 012-0991-00)
■ RM3100 Rackmount kit (see page 91 for dimensions of the kit)
■ Fuse adapter (see page 12 for more information)
Powering the Instrument On and Off
Power On
Power Off
NOTE. To ensure the EMC compliance listed in the Specifications, connect only high quality shielded cables to this instru-
ment. High quality shielded cables typically are braid and foil types that have low impedance connection to shielded con-
nectors at both ends.
1. Insert the AC power cord into the
power receptacle on the rear panel.
2. Use the front-panel power button to
power on the instrument.
Wait until the front panel display shows
that the instrument has passed all
power-on self tests.
1. Use the front-panel power button to
power off the instrument.
120
VA
1
Output
USB
Memory
USB
Memory
AFG 3102
1GS/s
100MHz
DUAL CHANNEL
ARBITRARY/FUNCTION GENERATOR
InputOutput Output
Channel
TriggerTrigger
View
Ch2 Ch1
Run ModeFunction
Sine
Leading/TrailingDuty/Width
Sweep Burst
Edit
Utility
Save RecallMore...
Arb
Pulse
Ramp
Square
Continuous Modulation
Default
Help
Offset/Low
Frequency/Period Amplitude/High
Phase Delay
2
Output
USB
Memory
USB
Memory
AFG 3102
1GS/s
100MHz
DUAL CHANNEL
ARBITRARY/FUNCTION GENERATOR
InputOutput Output
Channel
TriggerTrigger
View
Ch2 Ch1
Run ModeFunction
Sine
Leading/TrailingDuty/Width
Sweep Burst
Edit
Utility
Save RecallMore...
Arb
Pulse
Ramp
Square
Continuous Modulation
Default
Help
Offset/Low
Frequency/Period Amplitude/High
Phase Delay
1