User's Manual

Specifications
AWG510 & AWG520 Service Manual
1-9
Table 1-8: Auxiliary outputs (Cont.)
Characteristics PV reference pageDescription
Noise
5
Level -145 dBm / Hz to -105 dBm / Hz
Attenuator 1 dB step
Accuracy
"2.5 dB (at 100 MHz, -105 dBm/Hz)
Page 4-78
Connector Rear panel BNC connectors
Type Gaussian
4
The characteristics are specified at the end of the SMB-BNC cable (012Ć1459Ć00).
5
The characteristics are specified at the end of the BNC cable (012Ć0482Ć00).
Table 1-9: Period JItter (CH1 MARKER1 OUT)
Clock 1 GS/s 800 MS/s 400 MS/s
Measurement StdDev Pk-Pk StdDev Pk-Pk StdDev Pk-Pk
AWG520 6.0 ps 42.0 ps 5.0 ps 30.0 ps 4.5 ps 26.0 ps
AWG520 OP3 6.0 ps 42.0 ps 5.0 ps 30.0 ps 4.5 ps 26.0 ps
AWG510 5.0 ps 35.0 ps 5.0 ps 30.0 ps 4.5 ps 26.0 ps
AWG510 OP3 6.0 ps 42.0 ps 5.0 ps 30.0 ps 4.5 ps 26.0 ps
Table 1-10: Cycle to Cycle JItter (CH1 MARKER1 OUT)
Clock 1 GS/s 800 MS/s 400 MS/s
Measurement StdDev Pk-Pk StdDev Pk-Pk StdDev Pk-Pk
AWG520 9.5 ps 70.0 ps 9.0 ps 55.0 ps 8.0 ps 50.0 ps
AWG520 OP3 9.5 ps 70.0 ps 9.0 ps 55.0 ps 8.0 ps 50.0 ps
AWG510 8.5 ps 60.0 ps 8.0 ps 55.0 ps 8.0 ps 50.0 ps
AWG510 OP3 9.5 ps 70.0 ps 9.0 ps 55.0 ps 8.0 ps 50.0 ps