Data Sheet

ManualsBrandsTektronix ManualsLaboratory EquipmentTektronix TBS2104B Digital 100 MHz 2 GS/s 8 Bit

Digital Storage Oscilloscope

TBS2000B Series Datasheet

The TBS2000B Series of Oscilloscopes with a 9-inch WVGA display,

5 million point record length and 2 GS/s sample rate, capture and display

significantly more signal to help you debug and validate the designs faster.

Easily and confidently analyze your signals with new on-waveform cursor

readouts and 32 automated measurements, each with informative tips. The

TekVPI

probe interface supports traditional passive BNC probes, but also

enables wide application coverage with the latest active voltage probes and

current probes.

Key performance specifications

2 and 4 analog channel models

200 MHz, 100 MHz, and 70 MHz bandwidth models up to 2 GS/s

sampling rate

5 M record length on all channels

5 year warranty

Key features

9-inch WVGA color display with 15 horizontal grids shows 50% more

signal

TekVPI probe interface supports active, differential, and current probes

with automatic scaling and units

New front-end design enables more accurate measurements

32 automated measurements, and FFT function for quick waveform

analysis

Search and Mark features for easy identification of events that occur in

the acquired waveform

HelpEverywhere provides helpful on-screen tips for new users

Built-in Scope Intro handbook provides operating instructions and

oscilloscope fundamentals

The instrument user interface and the front panel overlay is translated

into 10 languages

Connectivity

USB 2.0 host port on the front panel for quick and easy data storage

USB 2.0 device port on rear panel for easy connection to a PC

10/100BASE-T Ethernet port for remote control over LAN

Wi-Fi interface provides wireless communications capability support

Education

Courseware function presents lab exercise guidance on the display

Fully compatible with TekSmartLab lab management software for

education

Autoset, Cursors and Automated measurements can be disabled to

help educators to teach basic concepts to students

A Wi-Fi adapter is available in some countries from Tektronix distributors as an accessory, model TEK-USB-WIFI. See Ordering Information for details.

www.tektronix.com 1

DRAFT

Summary of content (16 pages)

PAGE 1
Digital Storage Oscilloscope TBS2000B Series Datasheet Key features 9-inch WVGA color display with 15 horizontal grids shows 50% more signal TekVPI probe interface supports active, differential, and current probes with automatic scaling and units New front-end design enables more accurate measurements 32 automated measurements, and FFT function for quick waveform analysis Search and Mark features for easy identification of events that occur in the acquired waveform T HelpEverywhere provides helpful on-scr
PAGE 2
Datasheet Designed to make your work easier The TBS2000B Series is designed for easy operation and quick hands-on learning. Dedicated controls provide quick access to important settings, so you can evaluate signals faster. With the TBS2000B you get 10 vertical divisions and 15 horizontal divisions, so you can see more of your signal. The large display also offers more room for measurement results and menu information.
PAGE 3
AF T Digital Storage Oscilloscope D R Versatile triggering and acquisition modes – The trigger system is designed for troubleshooting today's mixed signal designs. Beyond a basic edge trigger, it also includes pulse width and runt triggering, which are especially useful for troubleshooting digital sections of your designs. Pulse width triggering is perfect for hunting narrow glitches or timeout conditions. Runt trigger is designed to capture signals that are shorter in amplitude than expected.
PAGE 4
Datasheet Quickly search for events of interest – The search button enables you to quickly setup a search criteria based on trigger settings. All occurrences of the event of interest with the acquisition are highlighted with search marks. Easily navigate to each instance of occurrence with dedicated navigation buttons for closer inspection and analysis. The measurements are grouped into four categories: Frequency, time, amplitude, and area.
PAGE 5
Digital Storage Oscilloscope TekVPI® Interface and active probe support Built-in tips for faster setup The TekVPI probe interface sets the standard for ease of use in probing. With this interface the TBS2000B Series Oscilloscope supports a wide range of the latest voltage and current probes, providing coverage for many applications. These probes are powered by and communicate with the TBS2000B through the VPI interface.
PAGE 6
Datasheet On-screen scope fundamentals Scope Intro handbook is embedded into the TBS2000B help system. Pressing the front panel Function button gives you access to information on oscilloscope basic operations, as well as an overview of the TBS2000B and TekSmartLab Lab Management System for education.
PAGE 7
Digital Storage Oscilloscope TekBench T TekBench™ is PC software that controls Tektronix oscilloscopes and arbitrary function generators. It offers intuitive instrument control, automated measurement data logging, automated frequency response measurements, and easy waveform exporting with required format to eliminate extra time and effort.
PAGE 8
Datasheet Specifications All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
PAGE 9
Digital Storage Oscilloscope Vertical system analog channels DC voltage measurement accuracy average mode Average of 16 waveforms ±((DC Gain Accuracy) X |reading - (offset - position)| + Offset Accuracy + 0.11 div + 1 mV) Delta Volts between any two averages of ≥16 waveforms acquired with the same oscilloscope setup and ambient conditions ±(DC Gain Accuracy X |reading| + 0.08 div + 1.
PAGE 10
Datasheet Trigger system Trigger modes Auto, Normal, and Single Trigger holdoff range 20 ns to 8 s Trigger types Edge Positive or negative slope on any channel. Coupling includes DC, HF reject, LF reject, and noise reject. Pulse width Trigger on width of positive or negative pulses that are >, <, =, or ≠ a specified period of time. Runt Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
PAGE 11
Digital Storage Oscilloscope Remote control software web page Built-in web page enables remote control of horizontal and vertical scale, trigger settings, and measurements. Allows waveform and image save to USB flash drive. Display system Display type 9 inch (228 mm) wide format liquid crystal TFT color display. Display resolution 800 horizontal by 480 vertical displayed pixels (WVGA). Waveform styles Vectors, Variable Persistence, and Infinite Persistence. Graticules Grid, None.
PAGE 12
Datasheet Physical characteristics Dimensions TBS2xx2: Height: 174.9 mm (6.89 in) Width: 372.4 mm (14.66 in) Depth: 117.7 mm (4.64 in) TBS2xx4: Height: 201.5mm (7.93 in) Width: 412.8 mm (16.25 in) Depth: 128.1 mm (5.58 in) Weight TBS2xx2: 2.62 kg (5.8 lbs.), standalone instrument. 5.1 kg (11.2 lbs.), when packaged for domestic shipment. TBS2xx4: 4.08 kg (9.0 lbs.), stand-alone instrument. 6.89 kg (15.2 lbs.), when packaged for domestic shipment.
PAGE 13
Digital Storage Oscilloscope Ordering information Models Supported instruments TBS2072B 70 MHz bandwidth, 2 GS/s sample rate, 2-channel digital storage oscilloscope, 5 Mpts record length, 5 year warranty. Certificate of Calibration Standard. TBS2074B 70 MHz bandwidth, 2 GS/s sample rate, 4-channel digital storage oscilloscope, 5 Mpts record length, 5 year warranty. Certificate of Calibration Standard.
PAGE 14
Datasheet Standard accessories Probes Accessories Warranty TPP0200 200 MHz, 10x passive probe (one per analog channel) 200 MHz models TPP0100 100 MHz, 10x passive probe (one per analog channel) for 70 MHz and 100 MHz models 071-3635-xx Compliance and Safety Instructions 077-1149-xx Programmer manual, available inhttp://www.tek.
PAGE 15
Digital Storage Oscilloscope Instrument options Instrument Options 2-WIFI USB Wi-Fi dongle for TBS2000B Series Oscilloscope only Power plug options North America power plug (115 V, 60 Hz) Opt. A1 Universal Euro power plug (220 V, 50 Hz) Opt. A2 United Kingdom power plug (240 V, 50 Hz) Opt. A3 Australia power plug (240 V, 50 Hz) Opt. A4 North America power plug (240 V, 50 Hz) Opt. A5 Switzerland power plug (220 V, 50 Hz) Opt. A6 Japan power plug (100 V, 50/60 Hz) Opt.
PAGE 16
Datasheet Service options Opt. C3 Calibration Service 3 years. Includes traceable calibration or functional verification applicable, for recommended calibrations. Coverage includes the initial calibration plus 2 years calibration coverage. Opt. C5 Calibration Service 5 years. Includes traceable calibration or functional verification applicable, for recommended calibrations. Coverage includes the initial calibration plus 4 years calibration coverage. Opt. D1 Calibration Data Report. Opt.