User Guide

Command Descriptions
Syntax
HORizontal?
Returns
Returns all horizontal settings
Examples
HORIZONTAL? might return the following string: HORIZONTAL:VIEW
MAIN;RECORDLENGTH 2500;MAIN:POSITIO
N 0.0E0;S CALE
5.0E-4;HORIZONTAL:DELAY:PO SITION 0.0E0;SCALE 2.5E-4
HORizontal:DELay? (Query Only)
Returns all settings for the window time b ase. The commands
HORizontal:DELay:SECdiv and HORizontal:DELay:SCAle are equivalent, so
only the values for HORizontal:DELay:SCAle are returned.
Group
Horizontal
Syntax
HORizontal:DELay?
Returns
All settings for the window time base
Examples
HORIZONTAL:DELAY? might return HORIZON TAL:DELAY:POSIT ION 0.0E0;
SCALE 5 .0E-4
HORizontal:DELay:POSition
Sets or queries the window time base horizontal position. This command is
equivalent to adjusting the Horizontal Position when Window Zone or Window
is selected from the Horizontal menu.
Group
Horizontal
Syntax
HORizontal:DELay:POSition <NR3>
HORizontal:DELay:POSition?
Arguments
<NR3> is the position in seconds. This value is the difference between the trigger
point and the center graticule. Positive values place the trigger before the center
graticule.
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-95