Operation Manual

17
GB
9 MAINTENANCE
9.1 Routine maintenance
All tasks requiring removal of air conditioner
covers must – as with installation - be carried
out by expert personnel
Before carrying out any
work on the air conditioner it is essential
that you disconnect the 230 V power
supply and wait for all its component
parts to cool down.
• Remove the external cover and spray a
suitable detergent onto the heat
exchangers (evaporator and condenser)
and then rinse to remove impurities.
Check that the condensate drain holes
are unobstructed.
• Check that the seals are in good condition
and there is no infiltration of water into the
vehicle.
• All traces of oxidation must be removed
and metallic parts coated with a suitable
paint.
• Check that wiring insulation is in good
condition and eliminate any traces of
moisture.
• Check that all screws are properly
tightened.
• If the vehicle is garaged for the winter
disconnect the air conditioner from the
power socket.