Operation Manual

14
GB
5.8 Setting system time on remote
control
After inserting the batteries, set the system
time on your remote control:
• Press and hold down the SET key on
your remote control until the system time
digits start flashing
• By using the +HOUR and –HOUR keys,
set your system time
• Press the SET key once again
5.9 Automatic operation mode
1) Press the On/Off key
2) Press the MODE key repeatedly until the
display shows the Automatic mode
symbol
3) Set your required temperature with the
keys +TEMP and –TEMP
4) Press the FAN key several times until
you reach your required ventilation
setting.
5.10 Cold operation mode
1) Press the On/Off key
2) Press the MODE key repeatedly until
the display shows the COLD mode
symbol.
3) Set your required temperature with the
keys +TEMP and -TEMP.
4) Press the FAN key several times until
you reach your required ventilation
setting.
5.11 Heating operation mode
1) Press the On/Off key
2) Press the MODE key several times until
the display shows the HOT mode symbol.
3) Set your required temperature with the
keys +TEMP and -TEMP.
4) Press the FAN key several times until you
reach your required ventilation setting.
In Heating mode the air
conditioner is effective with outside
temperatures down to -2°C, while below
this value, delivery efficiency is
considerably reduced.
If the air conditioner is
turned off during the heating mode, the
fan will remain in operation for a few
minutes in order to dissipate the heat
accumulated inside the air conditioner,
before stopping automatically.
19
1
2
5
7
6
8
9
10
11
3
4
12