Operation Manual

6
GB
2.3 Technical specifications
SILENT 7400 H
Power supply
230 V 50 Hz
Consumption
4.2 Ampere
Peak current
18 A (0.15 sec.)
Absorbed power, cooling
900 Watt
Absorbed power, heating
920 Watt
Cooling capacity
7500 Btu/h
Heating capacity
7700 Btu/h
Type and quantity of coolant gas
R 407c … 500 gr.
N° of fan speeds
3
Air flow rate
420 m3/h
Waterproof rating
IP X4
Generator required
2200 W
Diffuser dimensions (H x L x W)
6.3x52.3x51 cm
Monobloc dimensions (H x L x W)
23.5x98x65 cm
Weight
34 Kg
Some of the technical characteristics in
this table may vary.
Only the data shown on the actual
conditioner identification plate is valid.
3 TRANSPORT, HANDLING,
STORAGE
3.1 Storage
During transport the air conditioner is
protected by its cardboard packaging.
The conditioner must be stored indoors in a
horizontal position in a dry, ventilated area.
The type of packaging allows up to 5 (five)
conditioners to be stacked on top of each
other.
Do not turn the package
upside-down. The right way up is
indicated by the symbol on the packaging
( ↑↑).
Stacking more than five
packaged air conditioners can damage the
conditioners themselves and put
personnel at risk of injury.
3.2 Weight
Weight SILENT 7400 H, packaging excluded:
34 kg
3.3 Handling
Packaged air conditioners can be moved
using standard means of lifting and transport.
The packs have spacers for insertion of
transpallet forks.
Always observe safety
and accident prevention
regulations when lifting and transporting.
Use only lifting and transport gear of a
load bearing capacity greater than the
weight to be lifted.
4 INSTALLATION
4.1 Preliminary information
Before installing the
conditioner you must read these
instructions thoroughly to prevent errors.
Incorrect installation can
irreparably damage the air conditioner
and compromise user safety.
European Machine Directive 2006/42/EC
states that the manufacturer cannot be held
liable for poor air conditioner performance
and/or safety should the air conditioner fail to
be installed in observance of the information
provided in this manual. Moreover, the
manufacturer cannot be held liable for any
resulting injury or damage.
Installation must only be
carried out by qualified, specially trained
personnel.