The router with ADSL 2+ and UMTS (3.5G/HSPA+) bintec RS230au+ • UMTS (3.5G, HSPA+, 21.1/5.
bintec RS230au+ The router with ADSL 2+ and UMTS (3.5G/HSPA+) The bintec RS230au+ with integrated ADSL 2+ Annex A and HSPA+ UMTS modem (21.1/5.76 Mbps) is, thanks to its high-speed UMTS capability, especially suited for scenarios where high availability and redundancy are indispensable. The bintec RS230au+ is a powerful and, thanks to its comprehensive equipment, flexible router. The integrated UMTS modem supports the HSPA+ (3.5G) standard with a maximum download rate of 21.
The DNS proxy function supports the LAN for address implementation and the automated IP configuration of PCs is carried out over an integrated DHCP server. Comprehensive IPSec implementation The IPSec implementation integrated in bintec RS230au+ works not only with preshared keys but also with certificates. This allows a public key infrastructure to be created for maximum security. (The German Federal Office for Information Security also recommends the use of certificates.
Features DSL ADSL ADSL over POTS (ITU G.992.1 Annex A G.Lite (ITU G.922.2) ADSL 2 / ADSL 2+ ADSL over POTS (ITU G.992.3, ITU G.992.5 Annex A) ADSL 2 ADSL2 over POTS Annex L ADSL 2 ADSL2 over POTS Annex M ADSL Support of Dying Gasp ATM Support of layer 1 protocol AAL5, PVCs, RFC 1483 ATM Support of up to 7 virtual channels (VC) ATM Support of OAM F4/F5 line monitoring ATM Support of ATM traffic management (COS - CBR, VBR, UBR) GSM / UMTS Supported standards Support of UMTS (3.
VPN IPSec IPComp IPSec IPComp data compression for higher data throughput via LZS IPSec certificates (PKI) Support of X.
Routing RIP Support of RIPv1 and RIPv2, separated configurable for each interface Extended RIP Triggerd RIP updates according RFC 2091 and 2453, Poisened Rerverse for a better distribution of the routes; furthermore the possibility to define RIP filters for each interface.
Redundancy / Loadbalancing VPN backup Simple VPN backup via different media. Additional enables the Teldat interface based VPN concept the application of routing protocols for VPN connections.
Administration / Management TACACS+ Support of TACACS+ server for login authentication and for shell comando authorization Time synchronization The device system time can be obtained via ISDN and from a SNTP server (up to 3 time server configurable). The obtained time can also be transmitted per SNTP to SNTP clients. Automatic Time Settings Time zone profiles are configurable. That enables an automatic change from summer to winter time.
Hardware Realtime clock System time persists even at power failure for some hours. Wall mounting Integrated in housing Environment Temperature range: Operational 0°C to 40°C; storage -10°C to 70°C; Max. rel. humidity 10 - 95% (non condensing) Power supply External wall power supply 110-240V / 12 V DC, 1.
Pick-up Service / Warranty Extension Service Package 'medium' (5500000812) Warranty extension of 3 years to a total of 5 years, including advanced replacement for Teldat products of the category 'medium'. Please find a detailed description as well as an overview of the categories on www.teldat.de/servicepackages.
