User's Manual

13
Technical data transmitter
BATTERIES
BATTERY TYPE: 3 x 1.5 V
AAA alkaline
OPERATING TIME: Approx. 15 h. with continuous usage
WARNING! Do not recharge! Attempts to recharge may cause rupture,
or the leaking of hazardous liquids which will corrode the equipment.
CHANGE THE BATTERIES
1. Remove the clip (2 screws).
2. Remove the battery cover (2
screws).
3. Remove the batteries,
starting with the one in the
middle.
4. Put the new batteries (3 x
1.5V AAA batteries) in, start-
ing with the battery to the
left or to the right.
5. Put back the battery cover (2
screws).
PROGRAM THE TRANSMITTER
1. Remove the clip (2 screws).
2. Remove the battery cover (2 screws).
3. Remove the right battery. The program-
ming connector is placed behind the
battery.