User's Manual

15
Settings
1. Press the receiver Function button and the Select button at the
same time until red LED 1-5 go out.
NOTE! If red LED 7 ashes slowly, one or several transmitters are still
registered in the receiver.
REGISTER THE TRANSMITTER IN THE RECEIVER
ERASE ALL TRANSMITTERS FROM THE RECEIVER
1. Press the receiver Function button until red LED 7 lights up.
2. Press the receiver Select button until LEDs 1-5 light.
3. Press any transmitter button, e.g. button 1 until LEDs 1-10 ash 3
times before going out.