User's Manual

18
ERROR LED INDICATIONS
LED 7
(red)
+ LED 8
(yellow)
ON The receiver can not read the start-up
information. Contact your
representative.
LED 7
(red)
ON Radio module setup failed. Contact
your representative.
LED 8 ON A radio package not coming from a
Panther transmitter is received.
LED 8 + LED 9 ON A radio package is received, but is not
accepted. Contact your representative.
LED 8 + LED 10 ON A radio package is received from a
transmitter that is not registered.
Register the transmitter, or switch to
another frequency.
LED 9 ON A radio package is received, but the
radio signal strength is too weak.
Contact your representative for more
information.
LED 10 ON A radio package is received, but is not
accepted. Contact your representative.