Manualshelf

User's Manual

ManualsBrandsTele Radio ManualsElectronicsTransmitter
12345678910
10
STANDARD SETTINGS
• discontinuous radiotransmission
• no on/off function
The system will start transmitting as soon as the batteries are inserted,
the stop button is pulled out and a transmitter button is pressed. Radio
transmission will end when no transmitter button is being pressed.
DEFAULT STATE
START THE TRANSMITTER
TURN THE TRANSMITTER OFF
1. Pull out the stop button.
The transmitter transmits when a transmitter button is pressed.
1. Press the stop button.
NOTE! When the transmitter is active and the stop button is
pressed, all relays go off.
REGISTER THE TRANSMITTER IN THE RECEIVER
1-8 transmitters can be registered in the receiver.
1. Press the receiver Function button until red LED 7 lights up.
2. Press the receiver Select button until LEDs 1-5 light.
3. Press transmitter button 1, 1 step down, until LEDs 1-10 ash 3
times before going out.