User's Manual

Technical data T7-2 transmitter

NUMBER OF BUTTONS 8 x 2-step pushbuttons

BATTERIES 3 x 1.5V AA exchangeable

DEGREE OF PROTECTION IP65

NUMBER OF CHANNELS 16

SIZE 7.3 cm. x 17.8 cm./2.9 x 7 in.

(excl. rubber cover)

WEIGHT 250 g./ 0.55 lbs.

(excl. rubber cover, incl. batteries)

FREQUENCY 2405-2480 MHz.

Install batteries

1. Remove the battery cover (2 screws).

2. Put the batteries (3 x 1.5V AA

batteries) in.

3. Put back the battery cover (2 screws).

For optimum performance, use alkaline batteries.

The rubber cover

The transmitter comes with a removable rubber

cover that helps prevent the transmitter from bumps, dirt and dust. The

rubber cover can be removed and wiped off.

Remove the rubber cover

1. Loosen the rubber cover, starting at the top.

2. Lift the transmitter up out of the rubber cover.

Replace the rubber cover

1. Place the transmitter in the rubber cover, starting at the bottom.

2. Put the rubber cover back on the transmitter.

3 x 1.5V AA