User's Manual

10
Technical Data Receiver
RECEIVER LEDS
LED 2 lights yellow when the receiver has the correct supply voltage.
LEDs 6 + 10 ash in yellow 1, 2 or 3 times, depending on how many
transmitters that are registered in the receiver.
LED 12 lights green when the receiver receives radio signals (433.075 –
434.775 MHz).
LEDs 4 + 8 light green when a transmitter is logged in to the receiver.
LEDs 5 + 9 light red to indicate a fault on the receiver. Contact your
representative.
Each relay has a LED that lights red when the relay is activated.
CURRENT CONSUMPTION
SUPPLY VOLTAGE POWER
CONSUMPTION:MIN.
POWER
CONSUMPTION: MAX.
12V DC 150 mA 1 A
24V DC 60 mA 600 mA
24V AC 80 mA 800 mA
48V AC 100 mA 400 mA
115V AC 70 mA 200 mA
230V AC 25 mA 100 mA