Manualshelf

User's Manual

ManualsBrandsTele Radio ManualsElectronicsTRANSMITTER
10111213141516171819
12
START THE TRANSMITTER
1. Pull out the STOP button.
2. Press the Start-buttons 11+12 at the same time for more than 1
second.
The transmitter top LED lights.
(With a PIN code: Enter the PIN code (4 digits).
The transmitter top LED lights.
TURN THE TRANSMITTER OFF
1. Press the Stop-button.
NOTE! All relays deactivate when the stop button is being pressed.
REGISTER THE TRANSMITTER IN THE
RECEIVER
1-3 transmitters can be registered in each receiver. Each transmitter has
a unique ID code. Receiver LEDs 6 + 10 flash to indicate the number of
transmitters that are registered:
NO. OF
FLASHES
NO. OF REGISTERED
TRANSMITTERS
0 0
1 1
2 2
3 3
1. Place the receiver Function selector switch in ON position.
2. Press the receiver Reset button, and keep pressed.
Receiver LEDs 4-6, 8-10 light.
3. Release the Reset button. Receiver LEDs 4, 8, 5, 9 go out.
4. Start the transmitter.
5. Press the Start-buttons again until receiver LEDs 6 + 10 start to
ash.
6. Place the receiver Function selector switch in OFF position.