User's Manual
13
ERASE THE TRANSMITTER FROM THE
RECEIVER
1. Place the Function selector switch on the receiver in ON position.
2. Press the reset button on the receiver and keep pressed.
Receiver LEDs 4, 8, 5, 9 light.
3. Release the reset button. Receiver LEDs 4, 8, 5, 9 go out.
4. Place the Function selector switch on the receiver in OFF position.
5. WITHIN 2 SECONDS: Place the Function selector switch on the
receiver in ON position. Receiver LEDs 6+10 ash.
6. Place the Function selector switch on the receiver in OFF position.
SWITCH FREQUENCY
1. Press the Start-buttons 11+12 at the same time for more than 1
second. Release button 11. Keep button 12 pressed.
2. WITHIN 0.3 SECONDS: Release button 12. Press button 2.
The red transmitter LED 2 lights. The transmitter top LED ashes.
3. Enter the safety code: 1, 2, 3, 4 (NOTE! Maximum 5 seconds per
button).
The transmitter LED 2 goes out. The transmitter top LED ashes.
4. Select channel. E.g. for channel 02: Press button 0. Release. Press
button 2.
The red transmitter LED 2 ashes 3 times to conrm the change of frequency.
5. Restart the transmitter.