User's Manual
Table Of Contents
- Chapter 1: CUSTOMER INFORMATION
- Chapter 2: SAFETY INFORMATION
- Chapter 3: PRODUCT PAGES
- Chapter 4: INSTALLERS GUIDE
- Navigate in menu mode
- Enable PIN codes
- Create PIN codes
- Erase PIN codes
- Show registered PIN codes
- Start the transmitter in operating mode
- Start the transmitter in operating mode with PIN codes
- Turn the transmitter off
- Login/logout
- Register
- Erase
- Replace
- Automatic shutdown
- Frequencies & channels
- Relay functionality
- Digital inputs
- Chapter 5: OPERATING MODES
- Chapter 6: LOAD SELECT MODES
- Chapter 7: BATTERY GUIDE
- Chapter 8: CERTIFICATIONS CHAPTER
TERMINALBLOCKFOREXTERNALANALOGUEREFERENCE
ANDISOLATEDANALOGUESUPPLY
How to connect to the terminal block depends on the configurations made to the receiver. Please,
contact your Tele Radio representative for further assistance.
50. Unconnected
51. Unconnected
52. Unconnected
0 to +10V analogue output, internal DC/DC converter on:
50. Negative supply
51. Unconnected
52. Positive supply
0 to +10V analogue output, internal DC/DC converter off:
50. Unconnected
51. External reference*
52. Unconnected
-10 to +10V analogue output, internal DC/DC converter on***:
50. Negative supply
51. External reference*
52. Positive supply
-10 to +10V analogue output, internal DC/DC converter off**:
- 12 -