User's Manual
Table Of Contents
- Chapter 1: CUSTOMER INFORMATION
- Chapter 2: SAFETY INFORMATION
- Chapter 3: PRODUCT PAGES
- Chapter 4: INSTALLERS GUIDE
- Navigate in menu mode
- Enable PIN codes
- Create PIN codes
- Erase PIN codes
- Show registered PIN codes
- Start the transmitter in operating mode
- Start the transmitter in operating mode with PIN codes
- Turn the transmitter off
- Login/logout
- Register
- Erase
- Replace
- Automatic shutdown
- Frequencies & channels
- Relay functionality
- Digital inputs
- Chapter 5: OPERATING MODES
- Chapter 6: LOAD SELECT MODES
- Chapter 7: BATTERY GUIDE
- Chapter 8: CERTIFICATIONS CHAPTER
ON/OFFSWITCH
The transmitters have an on/off switch on the
backside. The switch breaks the power supply
from the battery. When in position 0/off, the
transmitter cannot be started unless you connect
the charger plug. When the transmitter is
transported by airplane, the on/off switch must
be in 0/off position. The switch should not be
used as an on/off button for the transmitter. To
turn the transmitter off, use the stop button.
BUTTONTRANSMITTERBACKSIDE
TG-T14-4
TG-T14-5
TG-T14-6
TG-T14-7
TG-T14-8
TG-T14-9
TG-T15-4
TG-T15-5
TG-T15-6
TG-T15-7
TG-T15-8
TG-T15-9
1. Rubber cover 4. CE and product label
2. Stop button 5. Battery charger socket
3. Clip 6. On/off switch
- 26 -