Installation Instructions
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Safety
- Chapter 3: Functional safety
- Chapter 4: Technical data
- Chapter 5: Product general description
- Chapter 6: Boards description
- Chapter 7: Status and error indications
- Chapter 8: Operation
- Chapter 9: Configuration menu
- Chapter 10: Warranty, service, repairs, and maintenance
- Chapter 11: Regulatory information
- Annex A: Glossary
- Annex B: Index
LED Colour Off On Indicates
3
4
green
orange
●
●
Receiving a radio packet, custom ID not accepted.
2
3
4
yellow
green
orange
●
●
●
1. Receiving a radio packet from a registered
transmitter. The receiver is already controlled by
another registered transmitter.
2. Load select mode is activated but wrong load is
transmitted to the receiver.
1–4 red
yellow
green
orange
●
●
●
●
TRABUS mode (PC communication)
7.2Menu mode indications
The menu mode is accessed by pressing the Function button a predefined number
of times. The different menus are identified by the function LEDs 1–4 according to
the following table.
: LED is lit. : LED is off.
Function LEDs Menu
LED 1
(red)
LED 2
(yellow)
LED 3
(green)
LED 4
(orange)
○ ○ ○
Register/ erase transmitters
34 IM-PN-RX107-CERT-01pre4
PRELIMINARY