Installation Instructions
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Safety
- Chapter 3: Functional safety
- Chapter 4: Technical data
- Chapter 5: Product general description
- Chapter 6: Boards description
- Chapter 7: Status and error indications
- Chapter 8: Operation
- Chapter 9: Configuration menu
- Chapter 10: Warranty, service, repairs, and maintenance
- Chapter 11: Regulatory information
- Annex A: Glossary
- Annex B: Index
Digital
outputs…
Can be used for…
DO1 e.g. for a +5V buzzer
DO2 +5V bright LEDto indicate that
the stop relays are activated.
DO3–7 N/A
2 Relay number on the receiver
Button functions
Direction functions
*
Can be used to switch between Loads A and B
On relays Stop relays (SR1 + SR2) and DO2 are
active when the radio link is up.
Work relays Relay 29 should be activated if any of
the transmitter buttons are pressed.
Load select relays Load A: relay 14 + 27
Load B: relay 15 + 28
Programmable relay functions Relay 10 and 11 can be set to latching or
momentary.
Interlocking Between button pairs: 1–2, 3–4, 5–6
Radio mode Continuous
Zero position check Active for all functions
IM-PN-RX107-CERT-01pre4 45
PRELIMINARY