Installation Instructions

When the equipment controlled by the receiver's standard relays is
connected via the stop relays, make sure that the maximum current
through the stop relays is still within the specifications. Contact your
representative for assistance.
RISK OF UNINTENDED EQUIPMENT OPERATION
Only transmitters that are intended for use should be registered in the
receiver.
Failure to follow these instructions could result in death, serious injury,
or equipment damage.
RISK OF ELECTRIC SHOCK
The receiver must only be opened by qualified installers or authorized
personnel.
Make sure the power supply is switched off before opening the receiver.
Failure to follow these instructions could result in death, serious injury,
or equipment damage.
l The receiver must be securely attached and located where it will not
be hit by e.g. any moving parts.
l Do not install the product in areas affected by strong vibrations
l Cable glands and vent plugs must face downwards to prevent water
ingress.
l Ensure that the power supply is connected to the correct terminals.
l Ensure that flexible cords and cables are not damaged through
friction or stress.
l Do not use damaged cables.
l Ensure cables and connectors do not hang loose.
l The receiver product is designed to withstand normal weather conditions but
should be protected from extreme conditions.
l Mount the receiver product in a location where the LEDs are easily visible
and the button on the receiver accessible.
l Make sure to install available accessories inside or on the receiver before
permanently installing the receiver.
IM-PN-RX107-CERT-01pre4
9
PRELIMINARY