Datasheet

ManualsBrandsTele ManualsIndustrial RelaysAnalogue Value Source OCTO, 1NO, Screw Terminal

Subject to alterations and errors

Release 11/02

Coupling relays - OCTO series

Installation design

Width 17.5mm

Analog data encoder 0 to 10VDC

Checkback signal of the switch setting ‚AUTO‘

Technical data

1. Functions

AUTO output according to input YR

0 permanently OFF

HAND output according to set value (regulator)

2. Indicators

Yellow LED ON/OFF: intensity according to the value of the

output signal

3. Mechanical design

Self-extinguishing plastic housing, IP rating IP40

Mounted on DIN-Rail TS 35 according to EN 50022

Mounting position: any

Shockproof terminal connection according to VBG 4

(PZ1 required), IP rating IP20

Initial torque: max. 1Nm

Terminal capacity:

1 x 0.5 to 2.5mm² with/without multicore cable end

1 x 4mm² without multicore cable end

2 x 0.5 to 1.5mm² with/without multicore cable end

2 x 2.5mm² flexible without multicore cable end

4. Input circuit

Supply voltage: 24V AC/DC terminals A1(+)-A2

Tolerance: 24V AC/DC -15% to +10%

Rated frequency: 48 to 63Hz

Rated consumption: 24V AC/DC 0.58VA (0.33W)

Duration of operation: 100%

Reset time: -

Residual ripple for DC: 10%

Drop-out voltage: >30% of supply voltage

5. Output circuit

Output signal (terminals Y-GND):

Switch setting AUTO corresponding to input signal at

terminals YR - GND

Switch setting 0 0V

Switch setting HAND 0 to 10V

Output capacity Y: 10mW at 10V

(switch setting HAND)

Insulation voltage: 24V AC (according to IEC 664-1)

Surge voltage: 800V, overvoltage category III

(according to IEC 664-1)

6. Checkback

Setting ‚AUTO‘: terminals B1-B2

Maximum switching capacity: 56VA (2A / 28V AC/DC)

Minimum switching capacity: 5mVA (1mA / 5V AC/DC)

Contact resistance: max. 20mΩ

Electrical life: 3 x 10

operations at maximum load

7. Accuracy

Base accuracy: ±1% (of maximum scale value)

Adjustment accuracy: ±10% (of maximum scale value)

Repetition accuracy: -

Voltage inuence: -

Temperature inuence: ≤0.01% / °C

8. Ambient conditions

Ambient temperature: -25 to +55°C (according to IEC 68-1)

Storage temperature: -25 to +70°C

Transport temperature: -25 to +70°C

Relative humidity: 15% to 85%

(according to IEC 721-3-3 class 3K3)

Pollution degree: 2, if built-in 3

(according to IEC 664-1)

OVP1

4.02-4

Summary of content (2 pages)

PAGE 1
OVP1 Coupling relays - OCTO series Installation design Width 17.5mm Analog data encoder 0 to 10VDC Checkback signal of the switch setting ‚AUTO‘ Technical data 1. Functions AUTO 0 HAND output according to input YR permanently OFF output according to set value (regulator) 2. Indicators Subject to alterations and errors Yellow LED ON/OFF: intensity according to the value of the output signal 3.
PAGE 2
OVP1 Functions Automatic (AUTO) The contact of checkback B1-B2 is closed. The input signal applied to terminal YR is looped through unchanged to terminal Y. Permanently OFF (0) The contact of checkback B1-B2 is opened. No output signal at terminal Y. Manual signal (HAND) The contact of checkback B1-B2 is opened. Output signal at terminal Y (0 to 10V DC) according to the value set on the front mounted regulator. Connections Subject to alterations and errors Dimensions www.tele-power-net.