Datasheet

ManualsBrandsTele ManualsAccessoriesPotentiometer

Subject to alterations and errors

Release 12/05

Accessories - Timers

3.10-1

Power modules - TR series

1. Function

Plug-in transformer for TELE timers GAMMA series.

2. Mechanical design

Sealed self-extinguishing plastic housing. IP-rating IP40 (if mounted)

3. Electrical data and types

Galvanic separated transformer modul

Output circuit:

Supply voltage: s.table

Tolerance: 0.85 to 1.1 x U

Rated frequency: 50/60Hz

Duration of operation: 100%

input voltage type P

out

12VAC TR2 - 12VAC 2VA 0.5VA

24VAC TR2 - 24VAC 2VA 0.5VA

42VAC TR2 - 42VAC 2VA 0.5VA

48VAC TR2 - 48VAC 2VA 0.5VA

110VAC TR2 - 110VAC 2VA 0.5VA

127VAC TR2 - 127VAC 2VA 0.5VA

230VAC TR2 - 230VAC 2VA 0.5VA

400VAC TR2 - 400VAC 2VA 0.5VA

4. Ambient conditions

Ambient temperature: -25 to +55°C

Storage temperature: -25 to +70°C

Transport temperature: -25 to +70°C

Relative humidity: 15% to 85%

5. Mounting

For mounting the module first the protective cup has to be removed.

The module than can be concisely plugged into the mounting whole of

the TELE monitoring relay series GAMMA.

Dimensions

TR2

32mm 16mm

5mm

35mm

Technical data

Front cover for GAMMA series

1. Functions

Sealable front cover for GAMMA monitoring relays

2. Mechanical design

Plastic cover

Technical data

Summary of content (2 pages)

PAGE 1
Accessories - Timers Power modules - TR series Technical data 1. Function Plug-in transformer for TELE timers GAMMA series. 2. Mechanical design Sealed self-extinguishing plastic housing. IP-rating IP40 (if mounted) 3. Electrical data and types Subject to alterations and errors Galvanic separated transformer modul Output circuit: Supply voltage: s.table Tolerance: 0.85 to 1.1 x UN Rated frequency: 50/60Hz Duration of operation: 100% type Pin Pout 12VAC TR2 - 12VAC 2VA 0.
PAGE 2
Accessories - Timers Remote potentiometer - RONDO R2 Technical data 1. Functions F Remote potentiometer 2. Mechanical design Self-extinguishing plastic housing, IP rating IP64 (frontside) Mounted in front panel aperture clear diameter 22.5mm by means of retaining clip (included) according to DIN 43700 Mounting position: any Shockproof terminal connection according to VBG 4 Initial torque: max. 1Nm Terminal capacity: 1 x 0.5 to 1,0mm² with/without multicore cable end 3.