User's Manual

__________________________________________________________________________________
Page 5 / 9
3. Compatibility of the ManDown Sensor with Social alarm
systems
The ManDown Sensors must always be associated with a corresponding social alarm
system, according to the following table.
Type of ManDown Sensor Social alarm system
ManDown 434 MHz, TeleAlarm protocol All Bosch-TA NurseCall systems,
Carephone 10: 434 MHz,
Carephone 12: 434 MHz
4. Operating
4.1. Starting the sensor
When the ManDown Sensor is off, the user only has to press the central red button to turn it
on. A slow beeping sound will then confirm that the sensor is active.
Notice!
No help call transmission will take place during this operation.
4.2. Turning off the sensor
 Press the button for about five seconds
 A beeping sound is emitted during two seconds
 During these two seconds, release the button and press it a second time,
 The sensor is then turned off
 This last step will be confirmed by a slow beeping sound
It is always possible to turn off the sensor, even when the help call button is deactivated.
Notice!
A help call will be activated only after pressing the help call button for less the five seconds
and releasing the central red button. This means that during the procedure of turning off the
sensor, no alarm will be generated.
If the central red button is being pressed and released less that five seconds or pressed
longer than seven seconds, a help call will be generated. See chapter 2 Description.