User's Manual

User Manual for Model FM-10 Tx
1. An audio signal from any source can be connected to the audio input socket of the unit.
2. A DC 12V needs to be connected to the red wire (+ ve.) and black wire(-ve.).
3. When the power On/Off button is pressed on the handheld controller, a power LED will
indicate that the unit turns on.
4. A channel selector switch can be turned to select the different transmitted signals between the
frequencies of 88.1/88.3/88.5/88.7 MHz.
5. A stereo or mono output signal can be selected by turning the ST/MONO switch.
6. The unit will turn off when you press the power On/Off button, and the power LED will turn
off also.
FCC RF EXPOSURE COMPLIANCE:
This transmitter meets the government’s requirements for exposure to radio waves. This low
power transmitter complies with the Federal Communications Commission (FCC) RF exposure
limits for general population/Uncontrolled exposure environment. In addition, it complies with
the following standards and guidelines.
*- FCC 96-326, Guidelines for Evaluating the Environmental Effects of Radio-Frequency
Radiation.
*- FCC OET Bulletin 65 Edition 01-01 (2001) Supplement C, Evaluating Compliance with FCC
Guidelines for Human Exposure to Radio-Frequency Electromagnetic Fields.
*- ANSI/IEEE C95.1 – 1992, IEEE Standard for Safety Levels with Respect to Human Exposure
to Radio-Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
*- ANSI/IEEE C95.3 – 1992, IEEE Recommended Practice for the Measurement of Potentially
Hazardous Electromagnetic Fields – RF and Microwave.
Changes or modifications not expressly approved by Telean Technology Ltd. may void the user’s
authority to operate this device.