Come utilizzare la ProCaP How to use the ProCaP 1 Inserire il CaP sul cavo. Slide CaP on to cable. Inserire il cavo nell’apertura laterale del SPC, circa 1 cm. Insert the cable to the side hole of the SPC, about 1 cm. Stringendo lo spelacavi nel palmo della mano, fare pressione sulle lame e tirare il cavo in modo da ottenere il taglio longitudinale della guaina. Holding the stripper tool in the palm of your hand, squeeze blades together and pull cable out cutting both sides of the outer sheath.