User's Manual

TS4000 Radio Modem User’s Manual Configuration Program 8
The configuration of the TS4000 can be read out of the modem by selecting the
Retrieve Configuration command from the Modem menu or by pressing the
Retrieve Configuration button.
To program a configuration into the TS4000, use
the Program Configuration command from the
Modem menu or the Program Configuration
button.
CAUTION: Programming a configuration into the TS4000 will write over
(destroy) the configuration currently in the TS4000. To avoid losing the
TS4000’s configuration information, save the configuration by retrieving it and
then saving it as a PC file.
Configurations can be stored and recalled as PC files.
This is done using the commands under the File menu or
the corresponding buttons.
Command Action
New-Default Create a new file with default values.
Open Open a previously stored file. The user is prompted with a
directory and file list.
Close Close the active file.
Save Save the active file under the current name.
Save As Save the active file under a different name or in a different
directory. The user is prompted with a directory and file list.
Recent File List This shows the last ten open files. A file can be recalled by
selecting its name from the list.
The configuration program can access diagnostics
information from the TS4000. This is done using
commands under the Modem menu or the
corresponding buttons.
Programming and
Retrieving
Configurations
Storing
Configurations
Diagnostics