User's Manual

TS4000 Radio Modem User’s Manual Radio Setup 20
+TSC?
Note: The letter characters must be upper case.
The response string is sent out the serial port and is as follows.
+TSCxx
Where:
xx
= Channel number from 01 to 99
If a frequency channel is selected that has not been programmed with valid
frequencies, the modem will not receive or transmit and the RX and TX LEDs will
alternately flash.
The channel that the TS4000 activates at power up depends on the setting of the
Frequency Channel at Power Up control.
Invalid Channel Selection
Channel at Power Up