OPAL 1003 1005 1010 The Teledex one-line N O E S’RW MANUAL telephones specifically designed for the international hospitality industry.
INCLUDED IN YOUR PACKAGE Handset Base Unit Coiled Handset Cord Line Cord Clear Plastic Overlay User Guide CONNECTING THE OPAL TELEPHONE 1. Located on the left side of the Opal (as the phone is facing you) is a modular jack. Insert one end of the coiled handset cord into this jack (you should hear the coil cord click when properly inserted). 2. Insert the other end of the coiled handset cord into the modular jack on the handset. 3. Turn the telephone so the back panel is facing you.
Locate the HANDSET VOLUME key below the keypad. Press the key once and the volume level will increase one level (to MEDIUM volume). Press the key once more and the volume level will increase an additional level (to HIGH volume). To return the handset volume to NORMAL , press the handset volume key again. The handset volume will always return to NORMAL when the handset is replaced in the cradle. FLASH KEY Pressing the FLASH key initiates a 600ms hookflash.
OPAL TELEPHONE DIAGRAM MESSAGE WAITING LIGHT RINGVOLUME MODULARPHONE LINE JACK DATA PORT STORE KEY (RECESSED) AUTO DIAL KEYS (OPAL 1010 ONLY) AUTO DIAL KEYS (QUANTITY AND LOCATION WILL VARY BASED ON SPECIFIC MODEL AUTO DIAL KEYS (OPAL 1010 ONLY) HANDSET FLASH VOLUME KEY REDIAL
REQUIREMENTS OF PART 68 - FCC RULES This device has been granted a registration number by the Federal Communications Commission, under Part 68 rules and regulations for direct connection to the telephone lines. In order to comply with these FCC rules, the following instructions must be carefully read and applicable portions followed completely: 1. Direct connection to the telephone lines may be made only through the standard modular cord furnished, to the utility installed jack.
IMPORTANT SAFETY INSTRUCTIONS WHEN USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS. INCLUDING THE FOLLOWING: 1. READ AND UNDERSTAND ALL INSTRUCTIONS. 2. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE PRODUCT. 3. UNPLUG THE PRODUCT FROM THE WALL OUTLET BEFORE CLEANING. DO NOT USE LIQUID CLEANER OR AEROSOL CLEANERS. USE A DAMP CLOTH FOR CLEANING. 4.
FOR PURCHASING A TELEDEX PRODUCT! THANK YOU Teledex Corporation, 6311 San Ignacio Avenue, San Jose, CA 95119 www.teledex.
