DIAMOND ELITE SERIES USERS GUIDE COVERS MODELS L2-E L2S-E L2-5E L2S-5E L2-10E L2S-10E
DIAMOND ELITE SERIES TELEPHONE DIAGRAM INCLUDED IN YOUR PACKAGE Handset Base Handset Holder Ringer Volume Control Data Port Speaker Volume Control (models L2S-E, L2S-5E, L2S-10E only) Flash Key (hidden) Store Key (hidden) Pause Key (hidden) Line Cord Clear Plastic Overlay Coiled Handset Cord User Guide CONNECTING THE DIAMOND ELITE SERIES TELEPHONE 1) Located on the left side of the Diamond Elite is a modular jack labeled TO HANDSET.
Using the Speakerphone (models L2S-E, L2S-5E and L2S-10E only) 1) With the handset in the cradle press the line key associated with the ringing line. The Elite will go off hook, answering the ringing line with the speakerphone active. OR Press the SPEAKER key. The Elite will select the ringing line and answer with the speakerphone active. NOTE: The red SPEAKER LED will indicate that the speakerphone is active.
PROGRAMMING THE AUTO DIAL KEYS CONVERTING FROM DESK TO WALL MOUNT Models L2S-10E, L2-10E, L2S-5E, and L2-5E include programmable auto dial keys. The L2S-10E and L2-10E models each have ten (10) programmable auto dial keys, and the L2S-5E and L2-5E models each have five (5) programmable auto dial keys. These keys can be programmed to automatically dial telephone numbers or activate telephone system features. The Diamond Elite telephone can be converted for wall mounting applications.
REQUIREMENTS OF PART 68 - FCC RULES This device has been granted a registration number by the Federal Communications Commission, under Part 68 rules and regulations for direct connection to the telephone lines. In order to comply with these FCC rules, the following instructions must be carefully read and applicable portions followed completely: 1. Direct connection to the telephone lines may be made only through the standard modular cord furnished, to the utility installed jack.