User Manual

6
EXPRESSPORT ADAPTER CONFIGURATION
Web Configuration
ExpressPort adapter can be configure using a web server.
1. Connect the network as shown previously.
If your PC is connected via Ethernet cable, check that the
corresponding Link LED lights up on ExpressPort adapter.
If your PC is wireless, check the PC’s card utility to make sure that the
signal strength is good.
2. Open a Web browser (Internet Explorer, Netscape etc.).
3. Type ExpressPort adapter’s LAN IP (192.168.1.20) address into the browser’s Address
field.
4. Enter username and password. There are two types of users, admin user and super user.
The default username and password for admin user is admin/admin while the default
username and password for super user is super/super. Super user will be able to access
more features in the web server as compared to the admin user.
In every ExpressPort adapter Web Configuration page, the left panel is the navigation menu
containing the main sections. The right-side frame is where the detailed configuration is done.
Configuration
panel
Navigation
panel